1.1 Get Current Location 当前位置
Command format命令格式
|
[pass]
|
|
Full Text command example
文本命令例子
|
1234
|
|
Shortcut command example
快揵命令例子
|
|
|
Send the 4 digit password to vehicle SIMCARD and the system will reply with the current location
and status of the vehicle.
输入4位密码获取车辆当前状态和位置
|
|
1.2 Safe Immobilize安全锁定
Command format命令格式
|
[pass] IMMOBILIZE
|
|
Full Text command example
文本命令
|
1234 IMMOBILIZE
|
|
Shortcut command example
快揵命令
|
1234SI
|
|
The speed of the vehicle is taken into consideration before the immobilized sequence is activated.
When the vehicle speed reaches a slow speed naturally, only the fuel supply of the vehicle will be
cut and thus bring the vehicle to a total stop. This mode ensures that the vehicle is immobilized at
a safe and smooth way to prevent any possible accident.
本功能被激活后,当车辆速度达到一个缓慢的速度后车辆的燃料供应将被切断,从而使车辆完全停止。这种模式可确保车辆是以一个安全和平稳的方式被锁定,防止任何可能发生的事故。
|
|
1.3 Force Immobilize强制固定
Command format
|
[pass] FORCE IMMOBILIZE
|
|
Full Text command example
|
1234 FORCE IMMOBILIZE
|
|
Shortcut command example
|
1234SFI
|
|
Force Immobilization will activate the immobilize sequence immediately. Depend on the installer
programming setting there are two possible action of force immobilize:
With speed reduction algorithm:
These type of force immobilization will cut the fuel supply to the vehicle engine in a periodic pattern
to force reduce the vehicle speed before it halts to a total stop; estimate taken time is 2 minutes for
the whole process to finish.
Without speed reduction algorithm:
This type of force immobilization will cut the fuel supply immediately. Warning: Please use these
function wisely as it may cause danger.
本功能被激活后,在安装程序设置有2个可能的强制锁定:
快速约简算法:选用本模式的强制锁定会在2分钟内切断燃料供应,到发动机的周期规律的力量减少车辆的速度之前,暂停一个总停止;估计花费2分钟完成的全过程。
无速度约简算法:选用本模式的强制锁定会立即切断燃料供应。警告:请谨慎使用本功能,因为它可能造成危险。
|
|
1.4 Cancel Immobilize取消锁定
Command format
|
[pass] CANCEL IMMOBILIZE
|
|
Full Text command example
|
1234 CANCEL IMMOBILIZE
|
|
Shortcut command example
|
1234SCI
|
|
This function is to cancel the immobilizer sequence that has been activated earlier.取消锁定
|
|
1.5 Setting User Telephone 1设置用户号码1
Command format
|
[pass] TEL1=[User hand phone number]
|
|
Full Text command example
|
1234 TEL1=0191234567
|
|
Shortcut command example
|
1234ST1=0191234567
|
|
Set the authorize user hand phone number for all alert notification through SMS and voice call.
When user call the vehicle SIMCARD to perform listen in, the tracking unit will answer only when it
detect
these authorize user telephone caller ID.
设置授权用户手机号码,所有警报通知都将通过短信和语音通知授权用户号码。当用户想要监听车辆情况时,只有授权用户号码才可以。
|
|
1.6 Setting User Telephone 2
Command format
|
[pass] TEL2=[User hand phone number]
|
|
Full Text command example
|
1234 TEL2=0191234567
|
|
Shortcut command example
|
1234ST2=0191234567
|
|
Set the authorize user hand phone number for all alert notification through SMS and voice call.
When user call the vehicle SIMCARD to perform listen in, the tracking unit will answer only when
it detect these authorize user telephone caller ID.
|
|
1.7 Setting User Telephone 3
Command format
|
[pass] TEL3=[User hand phone number]
|
|
Full Text command example
|
1234 TEL3=0191234567
|
|
Shortcut command example
|
1234ST3=0191234567
|
|
Set the authorize user hand phone number for all alert notification through SMS and voice call.
When user call the vehicle SIMCARD to perform listen in, the tracking unit will answer only when
it detect these authorize user telephone caller ID.
|
|
1.8 Setting User Telephone 4
Command format
|
[pass] TEL4=[User hand phone number]
|
|
Full Text command example
|
1234 TEL4=0191234567
|
|
Shortcut command example
|
1234ST4=0191234567
|
|
Set the authorize user hand phone number for all alert notification through SMS and voice call.
When user call the vehicle SIMCARD to perform listen in, the tracking unit will answer only when
it detect these authorize user telephone caller ID.
|
|
1.9 Setting Emergency Telephone 1设置紧急号码1
Command format
|
[pass] EMERGENCY1=[User hand phone number]
|
|
Full Text command example
|
1234 EMERGENCY1=0121234567
|
|
Shortcut command example
|
1234SE1=0121234567
|
|
Set the emergency number to call when the panic button activated. During panic situation the unit
would call the emergency number and allow listen in action. Other than panic button activated, the
emergency number would neither receive alert SMS nor able to call into the vehicle to perform listen
in. Depend on the different scenario the tracking unit can program to perform differently during panic
situation:
紧急电话号码是当紧急按钮被按下时会被拨通。在紧急情况下本系统会拨打紧急电话。除非按了紧急按钮,平时紧急号码不会接收警报短信,但也能打进车里进行监听。根据不同的情况,可以设置不同的紧急电话号码:
If the owner is also the driver or passenger or the vehicle (default setting)
In this type of panic situation the driver (owner) of the vehicle will need third party help. The emergency
number should be program to a trusted friend and relative which usually will not be in the vehicle together
with the owner, so that the emergency contact person can perform listen in and seek for help.
如果主人是司机或乘客或车辆(默认设置)
在这种类型的紧急情况司机(车主)的车辆将需要第三方的帮助。紧急号码应该设置一个值得信赖的朋友,或通常不会在车辆上的人,在紧急情况时紧急联络人可以收听并寻求帮助。
If the owner is neither the driver nor the passenger of the vehicle
When third party is driving the vehicle, the unit can be program to send panic SMS to user hand p
hone and the emergency number can be program to the user hand phone number too.
如果主人不是司机或车上的乘客
如果是第三者驾驶的车辆,本系统可以发送短信到用户手机,紧急号码可设置为用户的手机号码。
|
|
雷震子--16年电动车防盗器定制专家
24小时客服电话:如果您对雷震子防盗器感兴趣或有疑问,请点击右侧的在线咨询链接联系在线客服,或致电:400-688-2836,雷震子安防科技——您全程贴心的采购顾问。